Hi,
After solving the problem of my recording issues I now have another problem.
The imported backing track using WAV is fine with no problems at all, but when I record track 2 using WAV RT I am experiencing sound break up on the recorded track only. Any suggestions would be greatly appreciated.
Best regards,
Maurice.

Hi,

Try recording something, then quit Mixcraft and send us your mixcraft-log.txt file, which is located in this folder:

%appdata%\Acoustica\Mixcraft

Another way to find it is to click on the Windows Start Menu, select All Programs, then Acoustica Mixcraft 6 (or 5) and finally Logs.

Submit an Acoustica Support Request and attach the log file along with a brief description of the problem.

Greg

Hi Greg,
Thanks for the quick reply.
I have found the log you mentioned and it is quite a large file, do you want me to send the entire file ?
Best regards,
Maurice.

Hi Greg,
Looking through my previous posts I came across some advice
which said that the snap should be off for deleting part of a track.
On checking, I found that the snap was still off so I switched to snap
to measure and tried another recording and it seems to be fine.
Could this have been the problem ?
Best regards,
Maurice.

Snap won't affect recording, but it will affect moving, deleting parts of clips or anything else that requires positioning.

_________________
Acoustica Support
All my music is made with Mixcraft!
Eric at Mixcraftlive
Eric On Facebook

Hi Eric,
Thanks for the prompt reply. I will try some more recordings later
ans see if the results are ok, and if not could you let me know if the
entire log should be sent to you.
Best regards,
Maurice.

Yes, attach the log file, don't copy/paste it's text into the email. That will give us the whole log.

_________________
Acoustica Support
All my music is made with Mixcraft!
Eric at Mixcraftlive
Eric On Facebook