Acoustica - Software should be easy to use

String Instruments Hi Freq Artifact

Support and feedback for Acoustica's Mixcraft audio mixing software.

Moderators: Acoustica Dan, Acoustica Greg, Acoustica Chris, Acoustica Eric

sjoens
Posts: 145
Joined: Mon Nov 27, 2017 3:24 am

Re: String Instruments Hi Freq Artifact

Postby sjoens » Thu Feb 07, 2019 11:48 pm

Thanks Mark, I'll check it out.

No other D4's or any note from any other instrument affect me like this. Is why I suspect the sample set in Q.

Even if the sample set itself is not bad, something about it is affecting my ears.

OAN, I hear exactly what you mean about dentist's sonic tooth cleaner. He's not helping matters any. :?
Last edited by sjoens on Fri Feb 08, 2019 5:23 am, edited 1 time in total.
Mixcraft 8.1 Pro Studio (413), Windows 10 Alienware laptop, Behringer UFX1204USB mixer/interface.

User avatar
dpaterson
Posts: 560
Joined: Sat Apr 01, 2017 1:33 am

Re: String Instruments Hi Freq Artifact

Postby dpaterson » Fri Feb 08, 2019 12:36 am

Could you upload the Project file as well???

sjoens
Posts: 145
Joined: Mon Nov 27, 2017 3:24 am

Re: String Instruments Hi Freq Artifact

Postby sjoens » Fri Feb 08, 2019 5:22 am

Mark Bliss wrote:Here is a few various string section samples of D4 whole notes, tell me if any have the artifact you hear in your project?
D4 render Mp3.mp3


Out of the 6, I can hear it on 2, 3, 4, & 6.

It's very noticeable to my ears with headphones and speakers, mostly with the right ear as the left one is starting to go deaf at those freqs.
Mixcraft 8.1 Pro Studio (413), Windows 10 Alienware laptop, Behringer UFX1204USB mixer/interface.

User avatar
dpaterson
Posts: 560
Joined: Sat Apr 01, 2017 1:33 am

Re: String Instruments Hi Freq Artifact

Postby dpaterson » Fri Feb 08, 2019 7:12 am

dpaterson wrote:Could you upload the Project file as well???

Never mind.

I didn't see that it was Mark that had uploaded the .mp3 file. Point is: I don't hear any artifacts in the .mp3 file and that's why I asked for the Project file.

You say that you're hearing these artifacts through both speakers and headphones right??? I assume via the exact same hardware (audio interface) even with the .mp3 file??? If this is the case: have you got anything else to playback the .mp3 file that Mark uploaded e.g. an iPad or phone or maybe even a hi-fi set or CD/DVD player (even through a TV). Obviously what I'm saying is that maybe there's something wrong with your audio interface or some settings or something like that. I'd find it hard to believe that only certain frequencies would play havoc with one person's hearing.

User avatar
jlouvar
Posts: 520
Joined: Wed Jul 24, 2013 4:56 pm
Location: California - USA

Re: String Instruments Hi Freq Artifact

Postby jlouvar » Fri Feb 08, 2019 9:11 am

sjoens wrote:Hearing it... like a single sine wave at high pitch. I can uoload a sample if you'd like, but depending on your hearing you may not notice it as I do. Tinitis has taken over my left ear with the right one following.


You may want to make an opointment with a doctor for a hearing test, and see if the doctor can help you, or make some recommendations... seriously.

EDIT: Common causes of Tintis (ringing in ears) can have causes that aren't due to underlying disease. Examples include exposure to loud sounds, whiplash, head injuries, too much ear wax, or medication side effects.
The point being, if you have or think you have tintis, and if you haven’t already, you really should consult with your doctor about it before it gets worse... and it may be something as simple as ear wax, etc.

With that said, I feel very sorry for you, and hope it’s only temporary and can be easily fixed/treated.
Last edited by jlouvar on Fri Feb 08, 2019 12:59 pm, edited 1 time in total.
Mixcraft 8.1 Pro (64-Bit Build 418), Lenovo (1.80GHz, 8GB, 64-bit), Windows 10, Focusrite Scarlett 2i4, Event and PreSonus monitors, Korg TR61, Akai MPK249, MPK2 Mini, Fender American P & J basses, Strat, D35, and a lot of microphones, etc.

User avatar
dpaterson
Posts: 560
Joined: Sat Apr 01, 2017 1:33 am

Re: String Instruments Hi Freq Artifact

Postby dpaterson » Fri Feb 08, 2019 11:08 am

sjoens wrote:I can uoload a sample if you'd like...

Come to think about it that's a good idea i.e. try do exactly what Mark did and let's see if we all can hear it (this before running off to the doc. I'd say).

Look on the bright side: maybe you're gifted like me i.e. we all know I can hear the difference between 384kHz/64-bit and 44.1kHz/16-bit right???

User avatar
Acoustica Greg
Posts: 18796
Joined: Wed Mar 01, 2006 5:30 pm
Location: California
Contact:

Re: String Instruments Hi Freq Artifact

Postby Acoustica Greg » Fri Feb 08, 2019 11:15 am

Hi,

The D4 notes need to have sustain on them as well, don't they?

Greg
Mixcraft 8 - The Musician's DAW
Give it a try here: http://acoustica.com/mixcraft/
Check out our Mixcraft University video tutorials.

User avatar
Thomas
Posts: 267
Joined: Thu May 24, 2018 2:54 pm

Re: String Instruments Hi Freq Artifact

Postby Thomas » Fri Feb 08, 2019 11:40 am

I thought about the Tinnitus link as well. But even so, the spike on your Spectrum Analyzer should be repeatable. Did you say what you were using to see that spike?
Tom Was Already Taken, Therefore Thomas
Mixcraft 8 Pro Studio 64-Bit
Windows 10 64-Bit
AMD Athlon II X4 645 3.1 GHz 10GB Ram 7200RPM HDD
Behringer UMC404HD v4.38 interface

User avatar
Mark Bliss
Posts: 6144
Joined: Fri Jan 20, 2012 3:59 pm
Location: Out there

Re: String Instruments Hi Freq Artifact

Postby Mark Bliss » Fri Feb 08, 2019 11:48 am

Acoustica Greg wrote:The D4 notes need to have sustain on them as well, don't they?

I tried all the mentioned instrument samples with and without sustain applied, and both compared them to other sample libraries in my collection, and compared all with a spectrum analyzer.
Did not hear or see anything that seemed to be a clue.

The response to my mp3 samples is interesting though. I'll reveal what they are later tonight just for curiosity's sake. 8)
Stay in tune, Mark

Image

My SOUNDCLOUD Page

sjoens
Posts: 145
Joined: Mon Nov 27, 2017 3:24 am

Re: String Instruments Hi Freq Artifact

Postby sjoens » Fri Feb 08, 2019 3:54 pm

Thanks for everyone's help. My interface and hardware are fine as I 1st heard it on a smartphone using different headphones. The stray harmonic overtone is around 3191 Hz, whereas D4 is around 294 Hz.

Here's a D4 sample from my project after hiking the EQ all the way up to make the sound more noticeable.
Let me know if you still don't hear it. It can be heard all the way thru and into the end where it tapers off.

D4 hi pitch harmonic.mp3
(148.16 KiB) Downloaded 25 times
Mixcraft 8.1 Pro Studio (413), Windows 10 Alienware laptop, Behringer UFX1204USB mixer/interface.

squeakie
Posts: 170
Joined: Wed Apr 17, 2013 10:30 am

Re: String Instruments Hi Freq Artifact

Postby squeakie » Sat Feb 09, 2019 10:57 am

I can confirm this was present in MixCraft 7. I even tested it with all effects off, and it was still present. If the OP is hearing this in MC8, it’s probably still present. I found it was related to the raw samples used (in MC7). I have other VST’s and haven’t really messed with MC’s strings presets with MC8 Pro. I’ll go back and have a listen to them with 8 Pro. Keep in mind it’s also possibly more noticeable to some and not others due to the frequency level.

Sqk
Yamaha MOXF6, Roland Juno-Di, Casio MZX-500, Roland RS-70, M-Audio Venom, M-Audio Hammer-88, Casio PX-330, Behringer Studio Monitors, Mixcraft 8 Pro, Fujitsu T901 (i5, 8GB Ram, 64-bit, SSD), Lots of VST’s :-)

sjoens
Posts: 145
Joined: Mon Nov 27, 2017 3:24 am

Re: String Instruments Hi Freq Artifact

Postby sjoens » Sat Feb 09, 2019 11:25 am

Thanks squeakie, so I'm not going nuts after all??! :wink:

I'm sure the samples in MC7 are the same ones in MC8 as things like that aren't normally changed.

Still curious to see Mark's playlist revealed, tho.
Mixcraft 8.1 Pro Studio (413), Windows 10 Alienware laptop, Behringer UFX1204USB mixer/interface.

squeakie
Posts: 170
Joined: Wed Apr 17, 2013 10:30 am

Re: String Instruments Hi Freq Artifact

Postby squeakie » Sat Feb 09, 2019 11:33 am

I just tested it with MC8 Pro. I can hear it. It’s not the effects, it’s the sample. It’s not just D4 either. It really more like a “white noise” IMO. Sounds to me like typical artifacts you get from sample stretching ect when creating a sound to map across the full 88 key range. It’s certainly more noticeable on headphones. When I first noticed it in MC7 I was using those strings for some orchestral work and noticed it because the artifacts were starting to clash with other string instruments as I was combining presets into user patches.

I’m just glad that in my mid 40’s I can still hear it :-)

Sqk
Yamaha MOXF6, Roland Juno-Di, Casio MZX-500, Roland RS-70, M-Audio Venom, M-Audio Hammer-88, Casio PX-330, Behringer Studio Monitors, Mixcraft 8 Pro, Fujitsu T901 (i5, 8GB Ram, 64-bit, SSD), Lots of VST’s :-)

User avatar
Mark Bliss
Posts: 6144
Joined: Fri Jan 20, 2012 3:59 pm
Location: Out there

Re: String Instruments Hi Freq Artifact

Postby Mark Bliss » Sat Feb 09, 2019 3:38 pm

I haven't forgotten, sorry. Have to reopen the project at home and verify. I might get it wrong going by memory. 8)
Stay in tune, Mark

Image

My SOUNDCLOUD Page

squeakie
Posts: 170
Joined: Wed Apr 17, 2013 10:30 am

Re: String Instruments Hi Freq Artifact

Postby squeakie » Sat Feb 09, 2019 4:00 pm

I didn’t even go by the audio sample the OP provided. I just remember the same issue with MC7. The effects bring out more of the high freq artifacts too. Remove the effects and it just sounds like white noise in the background.

Sqk
Yamaha MOXF6, Roland Juno-Di, Casio MZX-500, Roland RS-70, M-Audio Venom, M-Audio Hammer-88, Casio PX-330, Behringer Studio Monitors, Mixcraft 8 Pro, Fujitsu T901 (i5, 8GB Ram, 64-bit, SSD), Lots of VST’s :-)


Return to “Mixcraft”

Who is online

Users browsing this forum: No registered users and 24 guests