Search found 214 matches

by creativeforge
Fri Mar 15, 2024 4:16 pm
Forum: Mixcraft
Topic: Getting the Korg nanoKontrol2 working with MX7 in Mackie mode
Replies: 22
Views: 1231

Re: Getting the Korg nanoKontrol2 working with MX7 in Mackie mode

Hi Greg,

Thanks for chiming in. I'm returning the unit. It was an open box and maybe something wasn't working with it and the customer returned it. Plus there was no bundled software. So I'll start fresh once I get the new one. :)
by creativeforge
Thu Feb 29, 2024 7:13 pm
Forum: Mixcraft
Topic: Getting the Korg nanoKontrol2 working with MX7 in Mackie mode
Replies: 22
Views: 1231

Re: Getting the Korg nanoKontrol2 working with MX7 in Mackie mode

Rolling Estonian wrote: Thu Feb 29, 2024 3:53 pm Also, in Korg Kontrol Editor the button in the top left (square just below edit) Global Midi Channel 1, Control Mode CC, LED Mode Internal. This is important!
M
Thanks!

I should write a tutorial if I succeed in order to have all the proper steps in sequence. :)
by creativeforge
Thu Feb 29, 2024 7:12 pm
Forum: Mixcraft
Topic: Getting the Korg nanoKontrol2 working with MX7 in Mackie mode
Replies: 22
Views: 1231

Re: Getting the Korg nanoKontrol2 working with MX7 in Mackie mode

TrevsAudio wrote: Thu Feb 29, 2024 3:00 pm The latter.
Click midi learn, do all you have to do, then click 'stop learning'.
Thanks Trevor, I made a note of it. :)
by creativeforge
Thu Feb 29, 2024 2:57 pm
Forum: Mixcraft
Topic: Getting the Korg nanoKontrol2 working with MX7 in Mackie mode
Replies: 22
Views: 1231

Re: Getting the Korg nanoKontrol2 working with MX7 in Mackie mode

Do you do the MIDI Learn one item at a time and then click MIDI Learn after each change to disable it before doing the next item? Or do you click MIDI Learn and then go through ALL the items and THEN click MIDI Learn to disarm it? Little details that could make a BIG difference but nobody seems to m...
by creativeforge
Thu Feb 29, 2024 6:44 am
Forum: Mixcraft
Topic: Getting the Korg nanoKontrol2 working with MX7 in Mackie mode
Replies: 22
Views: 1231

Re: Getting the Korg nanoKontrol2 working with MX7 in Mackie mode

I'm sure it's something pretty simple, Korg doesn't make things easy that's for sure! Maybe try a factory reset of the Korg then use the template I sent and upload that to the NK2, open a new project with 7 tracks and try midi learn like the video from MC. M I'll go back to it for sure, maybe a new...
by creativeforge
Thu Feb 29, 2024 6:30 am
Forum: Mixcraft
Topic: Getting the Korg nanoKontrol2 working with MX7 in Mackie mode
Replies: 22
Views: 1231

Re: Getting the Korg nanoKontrol2 working with MX7 in Mackie mode

If you hold down the those buttons the NK will go into Mackie mode, which I think pretty much resets it. I just use my template and go through each button and assign it like in the video. M Yes, I hear you. And I would LOVE to not look stupid and just have successfully done this already. :) But you...
by creativeforge
Wed Feb 28, 2024 5:05 pm
Forum: Mixcraft
Topic: Getting the Korg nanoKontrol2 working with MX7 in Mackie mode
Replies: 22
Views: 1231

Re: Getting the Korg nanoKontrol2 working with MX7 in Mackie mode

EDIT: I was wrong. I have to hold down SET + REWIND and plug the nanoKontrol2. Now in Mixcraft I can control Track #1 properly with the buttons. But ONLY Track #1. None of the other tracks respond. Here is what I see in the Korg Kontrol Editor. Yet ALL knobs and sliders respond properly on Track #1...
by creativeforge
Wed Feb 28, 2024 4:36 pm
Forum: Mixcraft
Topic: Getting the Korg nanoKontrol2 working with MX7 in Mackie mode
Replies: 22
Views: 1231

Re: Getting the Korg nanoKontrol2 working with MX7 in Mackie mode

OK thanks! Will watch again, as I tried a first pass but nothing seemed to be affected. Will report back when it gets working.

Much appreciated,

Andre
by creativeforge
Wed Feb 28, 2024 4:04 pm
Forum: Mixcraft
Topic: Getting the Korg nanoKontrol2 working with MX7 in Mackie mode
Replies: 22
Views: 1231

Re: Getting the Korg nanoKontrol2 working with MX7 in Mackie mode

Hi, You're still using Mixcraft 8? Do your settings in Control Surface preferences look like this? mx8-nanokontrol2.png On the hardware side, make sure that the Nanokontrol2 is set to be in Mackie Control mode. Check your user manual for information how to do that: https://www.korg.com/us/support/d...
by creativeforge
Wed Feb 28, 2024 4:02 pm
Forum: Mixcraft
Topic: Getting the Korg nanoKontrol2 working with MX7 in Mackie mode
Replies: 22
Views: 1231

Re: Getting the Korg nanoKontrol2 working with MX7 in Mackie mode

Here's a file you can use in Korg Kontrol Editor that I've set up. You'll still have to do midi learn in MC but it works great for me. Mackie never worked for me. M Ah thanks! So here is what I see now. :) ▼ c13b5853c931328cd41053363f54aaf9.png To my shame I never used MIDI Learn in MC. Checking fo...
by creativeforge
Wed Feb 28, 2024 3:54 pm
Forum: Mixcraft
Topic: Getting the Korg nanoKontrol2 working with MX7 in Mackie mode
Replies: 22
Views: 1231

Re: Getting the Korg nanoKontrol2 working with MX7 in Mackie mode

Hi Greg, Thank you, and yes I see these in the preferences. However, I have to connect the nano BEFORE opening Mixcraft, something that is never mentioned anywhere I read or watched. So there is a sequence to follow. 1- BEFORE starting Mixcraft, connect the nanoKontrol2. 2- In my case, I need to hol...
by creativeforge
Tue Feb 27, 2024 8:44 pm
Forum: Mixcraft
Topic: Getting the Korg nanoKontrol2 working with MX7 in Mackie mode
Replies: 22
Views: 1231

Getting the Korg nanoKontrol2 working with MX7 in Mackie mode

Is it OK if I revive this thread? With the help of a friend we were able to make it work up to a degree. The problem is that no matter which knobs or sliders you move, only track that responds is track #1. This is a very confusing gadget, supposed to simplify our workflow? I don't know. So far it's ...
by creativeforge
Mon Feb 19, 2024 4:51 pm
Forum: Mixcraft
Topic: Making automation "move" along with track content?
Replies: 6
Views: 329

Re: Making automation "move" along with track content?

...and of course, upgrading to Mixcraft 10 is a swell solution! :lol: Of course, Greg, however - not to belabor the point - I have not found a GUI that inspires a more fluid workflow for me than MX8. It's really sad, but I said all this before. When you guys have a GUI that's easier on the eyes and...
by creativeforge
Mon Feb 19, 2024 3:16 pm
Forum: Mixcraft
Topic: Making automation "move" along with track content?
Replies: 6
Views: 329

Re: Making automation "move" along with track content?

AH! Yes, for the cut and paste!! :D

Many thanks!

Andre
by creativeforge
Mon Feb 19, 2024 2:53 pm
Forum: Mixcraft
Topic: Making automation "move" along with track content?
Replies: 6
Views: 329

Re: Making automation "move" along with track content?

Hmmm... thanks, but nope. :(