For those of you using multi-out orchestral plugins...
Moderator: Acoustica Eric
- Acoustica Greg
- Posts: 24657
- Joined: Wed Mar 01, 2006 5:30 pm
- Location: California
- Contact:
For those of you using multi-out orchestral plugins...
Hi,
Chibear, and others... with Mixcraft 8, rather than having to use lanes with different MIDI channels with your multi-out plugins like Kontakt, you can put your MIDI on full tracks, then route the MIDI from the tracks into the muli-out Plugin on different MIDI channels. Check it out:
This was a feature that Acoustica Chris conceived of after staring at too many lanes for too long.
Greg
Chibear, and others... with Mixcraft 8, rather than having to use lanes with different MIDI channels with your multi-out plugins like Kontakt, you can put your MIDI on full tracks, then route the MIDI from the tracks into the muli-out Plugin on different MIDI channels. Check it out:
This was a feature that Acoustica Chris conceived of after staring at too many lanes for too long.
Greg
Mixcraft - The Musician's DAW
Check out our tutorial videos on YouTube: Mixcraft 10 University 101
Check out our tutorial videos on YouTube: Mixcraft 10 University 101
- Mark Bliss
- Posts: 7313
- Joined: Fri Jan 20, 2012 3:59 pm
- Location: Out there
Re: For those of you using multi-out orchestral plugins...
Diggin' it back up-
Still experimenting with both using lanes as well as Chris's solution- and learning.
But I have a related question, (and now that I think about it, this may actually be Dan's area.)
But if you have for example lanes of MIDI going into a VSTi on individual channels, and you adjust the clip gain (yeah, experimental question)......
If its not audio, you aren't really controlling the same thing. But it works (kind of, not well, not recommended)
Rhetorical question I suppose, but discovering it has an effect, and exploring the strange behavior it produces- What is that really doing? Is it sending a volume CC message to the VSTi?
Don't recommend trying it, causes weirdness. And as far as I can tell it doesn't do anything useful, I just have a need to understand what it IS doing.
Still experimenting with both using lanes as well as Chris's solution- and learning.
But I have a related question, (and now that I think about it, this may actually be Dan's area.)
But if you have for example lanes of MIDI going into a VSTi on individual channels, and you adjust the clip gain (yeah, experimental question)......
If its not audio, you aren't really controlling the same thing. But it works (kind of, not well, not recommended)
Rhetorical question I suppose, but discovering it has an effect, and exploring the strange behavior it produces- What is that really doing? Is it sending a volume CC message to the VSTi?
Don't recommend trying it, causes weirdness. And as far as I can tell it doesn't do anything useful, I just have a need to understand what it IS doing.
- Acoustica Greg
- Posts: 24657
- Joined: Wed Mar 01, 2006 5:30 pm
- Location: California
- Contact:
Re: For those of you using multi-out orchestral plugins...
Hi,
Clip gain should have no effect in this case at all. Are you sure it was having an effect on the other track?
By clip gain, you mean clip volume automation right?
Greg
Clip gain should have no effect in this case at all. Are you sure it was having an effect on the other track?
By clip gain, you mean clip volume automation right?
Greg
Mixcraft - The Musician's DAW
Check out our tutorial videos on YouTube: Mixcraft 10 University 101
Check out our tutorial videos on YouTube: Mixcraft 10 University 101
- Mark Bliss
- Posts: 7313
- Joined: Fri Jan 20, 2012 3:59 pm
- Location: Out there
Re: For those of you using multi-out orchestral plugins...
Yeah, I was experimenting with the gain envelope on the MIDI lanes, and to be honest, I expected no result since this would be a data track.
But it did effect volume. And when I toggled between lanes the result was erratic, with volume changing in unexpected ways.
Since then I adjusted the lanes back to unity, and adjusted the individual instrument levels and moved on to other testing.....
I will see if I can reproduce the phenomenon in the new build, and if so provide more info. As I understand it, that would be a bug.
But it did effect volume. And when I toggled between lanes the result was erratic, with volume changing in unexpected ways.
Since then I adjusted the lanes back to unity, and adjusted the individual instrument levels and moved on to other testing.....
I will see if I can reproduce the phenomenon in the new build, and if so provide more info. As I understand it, that would be a bug.
- Acoustica Greg
- Posts: 24657
- Joined: Wed Mar 01, 2006 5:30 pm
- Location: California
- Contact:
Re: For those of you using multi-out orchestral plugins...
Hi,
When you say gain envelope on MIDI lanes, do you mean the volume on the automation lane? Or the clip automation on the clips? Or something else? Or are you taking about something inside Kontakt or another plugin?
Changing those things has no effect on MIDI sent to another track with the Route To Track feature.
Greg
When you say gain envelope on MIDI lanes, do you mean the volume on the automation lane? Or the clip automation on the clips? Or something else? Or are you taking about something inside Kontakt or another plugin?
Changing those things has no effect on MIDI sent to another track with the Route To Track feature.
Greg
Mixcraft - The Musician's DAW
Check out our tutorial videos on YouTube: Mixcraft 10 University 101
Check out our tutorial videos on YouTube: Mixcraft 10 University 101
- freightgod
- Posts: 720
- Joined: Thu Nov 29, 2012 5:18 am
Re: For those of you using multi-out orchestral plugins...
Just getting into Miroslav Philharmonik and this is great! I'm glad I didn't have to 'unlearn' using lanes instead.
- freightgod
- Posts: 720
- Joined: Thu Nov 29, 2012 5:18 am
Re: For those of you using multi-out orchestral plugins...
Well, this is a little disappointing. I would have expected that muting the "sending" midi track or adjusting the volume, etc. would have some sort of effect on the orchestral plugin, but no. Everything still has to be done within Philharmonik (in my case). Or so it seems?
- Mark Bliss
- Posts: 7313
- Joined: Fri Jan 20, 2012 3:59 pm
- Location: Out there
Re: For those of you using multi-out orchestral plugins...
Don't be confused by what I am describing, I am purposely doing weird things to try and expose a quirk or bug. This is not the way to use it!freightgod wrote:Well, this is a little disappointing. I would have expected that muting the "sending" midi track or adjusting the volume, etc. would have some sort of effect on the orchestral plugin, but no. Everything still has to be done within Philharmonik (in my case). Or so it seems?
I'll come back to that after getting this sorted out.
Greg, I can confirm the new build (374) also does what I am trying to show, but alas, I am having trouble recording it. I couldn't get Fastone screen recorder to record sound previously, and in messing with that I updated my audio driver, and I think that fixed one problem I had recording, but now Fastone wont work at all in screen recorder mode, like before I migrated to Win10.
There's some kind of incompatibility issue here.
I'll try and expose this better tomorrow.
- freightgod
- Posts: 720
- Joined: Thu Nov 29, 2012 5:18 am
Re: For those of you using multi-out orchestral plugins...
Oh, no, Mark, I wasn't referring to your experiments. I was just surprised that actions on the original track had no effect on the sent midi. I guess this makes sense, and I haven't played around with control messages yet. I guess I'm a little surprised that muting a midi track has no effect, though...the midi signal is still transmitted to the destination. It's just a matter of me getting a grip on what's really going on. I watched Chibear's helpful vid on using lanes with multi-timbrals, and this new feature at least seems one step simpler than that.
Re: For those of you using multi-out orchestral plugins...
A short basic video using a multi-out instrument such as Miroslav or other instead of Acoustica Piano (non-multitimbral) would be more appropiate and most appreciated.
Re: For those of you using multi-out orchestral plugins...
I've been playing with this a bit and I think for multitimbral use as in changing articulations lanes is still the best method.
However the new features in 8 open up the possibility of packing a whole brass or string section into a single instance of Kontakt and still have it readable and the instruments separately controllable. The single instance saves both some RAM and some CPU.
However the new features in 8 open up the possibility of packing a whole brass or string section into a single instance of Kontakt and still have it readable and the instruments separately controllable. The single instance saves both some RAM and some CPU.
Win 7 Pro, 3930K, Gigabyte Ga-X79-UP4, Corsair AX860i, 64GB gSkill 1600 RAM, 5 X 120 GB Intel 520 SSD, 1T & 2T WD caviar black, EVGA nVidea 560, Asus Xonar Essence STX EWQL CCC, Kirk Hunter, Chris Hein, Omnisphere
Soundcloud YouTube
Soundcloud YouTube
Re: For those of you using multi-out orchestral plugins...
Forget the requested video. Thank You.
- Mark Bliss
- Posts: 7313
- Joined: Fri Jan 20, 2012 3:59 pm
- Location: Out there
Re: For those of you using multi-out orchestral plugins...
I'd have to say so far, each may have its use, still learning.chibear wrote:I've been playing with this a bit and I think for multitimbral use as in changing articulations lanes is still the best method.
However the new features in 8 open up the possibility of packing a whole brass or string section into a single instance of Kontakt and still have it readable and the instruments separately controllable. The single instance saves both some RAM and some CPU.
But back to trying to illustrate what I am trying to convey.
I am not sure if its a bug, if its something that shouldn't be allowed to occur, or exactly what to call it, you all can see what you think.
Either way, its just me, trying weird things to see what happens mostly.
Overview:
I have several (patches?) in Sampletank2, individually assigned to MIDI channel 1, 2 and 3 etc. respectively. And I have lanes correspondingly assigned to the specific channels.
Next, I adjusted the volume envelopes in the lanes, exaggeratedly in an effort to make what I am observing more obvious.
Lane one, channel one, the bass instrument is set full loud in Sampletank, and I set the lane envelope to reduce by 75%
Lane two is unaltered, and lane three has the lanes envelope reduced by 50%
Now this is where my first questions about this arise:
These lanes are sending MIDI data to Sampletank. Should the envelopes even work?
I actually expected not. But they do. How does this work?
Should this function be greyed out on MIDI lanes, or should this work properly?
While experimenting further, I found this odd behavior:
I created this video of me alternatively muting the lanes on and off while a 12 bar section loops.
As you will see/hear, sometimes when I mute/unmute another lane, (In the most obvious instance the third lane I think) the first lane (bass) changes volume, (I think switching to the envelope of the other lane).
Note also that as shown at the end, a volume shift also sometimes occurs when the loop ends/restarts.
Note: I set it up for the video to exaggerate the bass volume difference for illustrative purposes, but it seems to happen to all lanes at random times and patterns.
(And, no Dan, there are no secret lanes hiding under lanes. This time....... )
Yes folks that is possible. Mildly embarrassed by a "bug" submission that turned out to be that by mistake. More funny odd behavior.
Also, pardon the sound quality, apparently the only way I can get sound to record from this soundcard while screen recording is via the built in mic of my lappy. So it sounds bad and captures a lot of noise. Sorry for the poor quality.
But the level change should be apparent.
https://youtu.be/LX2JLHDhtHY
- freightgod
- Posts: 720
- Joined: Thu Nov 29, 2012 5:18 am
Re: For those of you using multi-out orchestral plugins...
It's called sleep, Mark! I can see why you're a beta tester! I kid, I kid...he said at 5 a.m.
Re: For those of you using multi-out orchestral plugins...
Tried to answer best I can......
Mark Bliss wrote:I'd have to say so far, each may have its use, still learning.chibear wrote:I've been playing with this a bit and I think for multitimbral use as in changing articulations lanes is still the best method.
However the new features in 8 open up the possibility of packing a whole brass or string section into a single instance of Kontakt and still have it readable and the instruments separately controllable. The single instance saves both some RAM and some CPU.
But back to trying to illustrate what I am trying to convey.
I am not sure if its a bug, if its something that shouldn't be allowed to occur, or exactly what to call it, you all can see what you think.
Either way, its just me, trying weird things to see what happens mostly.
Overview:
I have several (patches?) in Sampletank2, individually assigned to MIDI channel 1, 2 and 3 etc. respectively. And I have lanes correspondingly assigned to the specific channels.
you have this set up as a multi timbral.....all outputting to the same channel
Next, I adjusted the volume envelopes in the lanes, exaggeratedly in an effort to make what I am observing more obvious.
Lane one, channel one, the bass instrument is set full loud in Sampletank, and I set the lane envelope to reduce by 75%
Lane two is unaltered, and lane three has the lanes envelope reduced by 50%
Now this is where my first questions about this arise:
These lanes are sending MIDI data to Sampletank. Should the envelopes even work?
I actually expected not. But they do. How does this work?
Should this function be greyed out on MIDI lanes, or should this work properly?
this is some strangeness I have found from the beginning. If you want to use clip automation it is best to put it all in one lane. As set up you cannot balance the instruments. To do that you need to set up a multi channel instance so that each instruments outputs to a different stereo pair and then better to do your volume envelopes in the child tracks
While experimenting further, I found this odd behavior:
I created this video of me alternatively muting the lanes on and off while a 12 bar section loops.
As you will see/hear, sometimes when I mute/unmute another lane, (In the most obvious instance the third lane I think) the first lane (bass) changes volume, (I think switching to the envelope of the other lane).
Note also that as shown at the end, a volume shift also sometimes occurs when the loop ends/restarts.
Note: I set it up for the video to exaggerate the bass volume difference for illustrative purposes, but it seems to happen to all lanes at random times and patterns.
(And, no Dan, there are no secret lanes hiding under lanes. This time....... )
Yes folks that is possible. Mildly embarrassed by a "bug" submission that turned out to be that by mistake. More funny odd behavior.
Also, pardon the sound quality, apparently the only way I can get sound to record from this soundcard while screen recording is via the built in mic of my lappy. So it sounds bad and captures a lot of noise. Sorry for the poor quality.
But the level change should be apparent.
https://youtu.be/LX2JLHDhtHY
Win 7 Pro, 3930K, Gigabyte Ga-X79-UP4, Corsair AX860i, 64GB gSkill 1600 RAM, 5 X 120 GB Intel 520 SSD, 1T & 2T WD caviar black, EVGA nVidea 560, Asus Xonar Essence STX EWQL CCC, Kirk Hunter, Chris Hein, Omnisphere
Soundcloud YouTube
Soundcloud YouTube