Patches sticking "on" with Omnisphere 2
Moderators: Acoustica Greg, Acoustica Eric, Acoustica Dan, rsaintjohn
Patches sticking "on" with Omnisphere 2
Playing a patch...all of the sudden it sticks and keeps playing a note when key is released. Only way to get it to stop is change the sound, then unplug and replug the usb on the controller. It happened every once in a while with Omnisphere 1 and other synths. But after upgrading to 2 it happens quite often. Trying to figure out where the issue lays....Mixcraft 7 Pro, Omnisphere, my keyboard controller, PC....not sure. Windows 7 Intel i5 with 16 megs RAM. Acorn 64 Key controller. Any ideas?
Win 10 64 bit; MX9 Pro; Intel i7-9700 CPU ; 32 GB RAM ... 2TB SSD
- Acoustica Greg
- Posts: 24647
- Joined: Wed Mar 01, 2006 5:30 pm
- Location: California
- Contact:
Re: Patches sticking "on" with Omnisphere 2
Hi,
If a virtual instrument somehow misses a "note off" command, the note will keep playing. You can press Ctrl+Shift+M to silence the note, or choose "MIDI Reset!" from the Mix menu.
If the problem is only happening with that plugin, then the plugin would be a likely suspect.
Greg
If a virtual instrument somehow misses a "note off" command, the note will keep playing. You can press Ctrl+Shift+M to silence the note, or choose "MIDI Reset!" from the Mix menu.
If the problem is only happening with that plugin, then the plugin would be a likely suspect.
Greg
Re: Patches sticking "on" with Omnisphere 2
Omni 2 is apparently still pretty buggy. In case you weren't informed, there is a new upgrade available as noted here. It might help.
FWIW I also had the same problems occasionally on 1. As it didn't happen on any other of my libraries I assumed it was an Omni bug. When you get 2 working, how about a little review of 2 vs 1. Worth the $$$????
FWIW I also had the same problems occasionally on 1. As it didn't happen on any other of my libraries I assumed it was an Omni bug. When you get 2 working, how about a little review of 2 vs 1. Worth the $$$????
Win 7 Pro, 3930K, Gigabyte Ga-X79-UP4, Corsair AX860i, 64GB gSkill 1600 RAM, 5 X 120 GB Intel 520 SSD, 1T & 2T WD caviar black, EVGA nVidea 560, Asus Xonar Essence STX EWQL CCC, Kirk Hunter, Chris Hein, Omnisphere
Soundcloud YouTube
Soundcloud YouTube
Re: Patches sticking "on" with Omnisphere 2
Thanks for the link to the update. I had no idea. Omnisphere 1 worked fine for me but Omnisphere 2 in Sonar causes the engine to drop out before recording anything. Just auditioning the samples is all it would take. I've tried it in MixCraft and aside from it being a little sluggish its been okay. That said I just upgraded to MixCraft 7 and haven't had time to really push the envelope with it yet. I'm going for the update.
Win 10x64; Reaper; MixCraft 9 Pro; AMD FX4100 x4; 3.8GHz; DDR3 32 GB Ram; Dual 23" HP Monitors; Focusrite Scarlett 18i20 Gen2; SSD 1TB; 3 x 1TB and 1 x 640 GB HDD; Mackie HR 624 Monitors; Kali LP 8 monitors
Re: Patches sticking "on" with Omnisphere 2
I downloaded the latest updates for Omni2 and it works much better in Sonar now. No more dropouts and I am seeing a much smoother performance. Latest update is: 2.0.3d
Win 10x64; Reaper; MixCraft 9 Pro; AMD FX4100 x4; 3.8GHz; DDR3 32 GB Ram; Dual 23" HP Monitors; Focusrite Scarlett 18i20 Gen2; SSD 1TB; 3 x 1TB and 1 x 640 GB HDD; Mackie HR 624 Monitors; Kali LP 8 monitors