Melodyne 5 doesn't load
Moderators: Acoustica Greg, Acoustica Eric, Acoustica Dan, rsaintjohn
-
- Posts: 10
- Joined: Thu Mar 15, 2018 8:48 am
Melodyne 5 doesn't load
Any thoughts? Celemony updated and now Mixcraft can't find it. I added anything I could see labeled Celemony to the VST preference and that didn't help. Thanks All!
- Rolling Estonian
- Posts: 2055
- Joined: Sun Jan 11, 2015 9:42 am
- Location: MD/DC
Re: Melodyne 5 doesn't load
When I opened Melodyne in the sound tab it automatically started the process and after I did install it closed MC, when I opened MC it was updated to 5.
M
M
Re: Melodyne 5 doesn't load
I just updated to Melodyne 5 and it seems to be working okay... It all happened for me just like it did for Rolling Estonian.
- Joe -
MX9PS, 64-bit, build 460. Windows 10, Intel i5, 64-bit, 1.8GHz, 8GB.
Reverbnation: https://www.reverbnation.com/joelouvar
MX9PS, 64-bit, build 460. Windows 10, Intel i5, 64-bit, 1.8GHz, 8GB.
Reverbnation: https://www.reverbnation.com/joelouvar
-
- Posts: 10
- Joined: Thu Mar 15, 2018 8:48 am
Re: Melodyne 5 doesn't load
Thanks guys! I'm using a 32 bit version of Mixcraft, that may be the issue on my end. I'll try using 64 and see if that helps.
Re: Melodyne 5 doesn't load
Just a short information:
Technical changes with Melodyne 5
Please note that due to Melodyne 5’s modernized software infrastructure, support for certain old standards has been discontinued. Those affected are:
VST 2 discontinued (VST 3 is still supported, as is AU)
RTAS discontinued (AAX is still supported)
Rewire discontinued
32-Bit-support discontinued (operating system and DAW must provide 64-bit support)
Technical changes with Melodyne 5
Please note that due to Melodyne 5’s modernized software infrastructure, support for certain old standards has been discontinued. Those affected are:
VST 2 discontinued (VST 3 is still supported, as is AU)
RTAS discontinued (AAX is still supported)
Rewire discontinued
32-Bit-support discontinued (operating system and DAW must provide 64-bit support)
KDW
MC 9 Pro
Scarlett 18i8 2.gen., Scarlett Octopre, iConnectMIDI4+
Kawai MP7, Yamaha MODX 8, Yamaha SY22, EMU Protheus, Roland D-05, NI Maschine MK3
Cubase 9.5.50 Pro & 10.5 Pro, Dorico 3 Pro, WaveLab 10 Pro, Absolute 4, Melodyne Studio 4 ...
MC 9 Pro
Scarlett 18i8 2.gen., Scarlett Octopre, iConnectMIDI4+
Kawai MP7, Yamaha MODX 8, Yamaha SY22, EMU Protheus, Roland D-05, NI Maschine MK3
Cubase 9.5.50 Pro & 10.5 Pro, Dorico 3 Pro, WaveLab 10 Pro, Absolute 4, Melodyne Studio 4 ...
-
- Posts: 10
- Joined: Thu Mar 15, 2018 8:48 am
Re: Melodyne 5 doesn't load
That was it thank you!
Re: Melodyne 5 doesn't load
Also, according to the Celemony website, it's only going to work with 64-bit Windows 10 "or higher"
I've tried to get it to work with Win7 x64 but I just get an error message telling me to contact Celemony.
I've tried to get it to work with Win7 x64 but I just get an error message telling me to contact Celemony.
Focusrite Scarlett SOLO 3rd Gen --> Intel i3-9100, 8 GB RAM --> Windows 10 Pro --> Mixcraft 10.5 Pro Studio
- Acoustica Greg
- Posts: 24655
- Joined: Wed Mar 01, 2006 5:30 pm
- Location: California
- Contact:
Re: Melodyne 5 doesn't load
Hi,
Contact them and see what they say.
Greg
Contact them and see what they say.
Greg
Mixcraft - The Musician's DAW
Check out our tutorial videos on YouTube: Mixcraft 10 University 101
Check out our tutorial videos on YouTube: Mixcraft 10 University 101
Re: Melodyne 5 doesn't load
Melodyne 4 is more than enough for me so I'm not really bothered but for anyone that's interested here's the info. from their website:
For Melodyne 5 essential, assistant, editor and studio:
MacOS Intel Dual Core processor (Quad Core or better recommended), 4 GB RAM (8 GB or more recommended), macOS 10.12 or higher
WINDOWS Intel or AMD Dual Core processor (Quad Core or better recommended), 4 GB RAM (8 GB or more recommended), Windows 10 or higher,
ASIO-compatible audio hardware
Activation Computer-based or iLok USB dongle (2nd or 3rd generation), Melodyne essential only computer-based. Internet access is required for the first activation.
Interfaces Plug-in operation via VST3, AU or AAX. ARA integration with compatible DAWs, as set out in the section on DAW compatibility.
Technical changes with Melodyne 5:
Please note that due to Melodyne 5’s modernized software infrastructure, support for certain old standards has been discontinued. Those affected are:
VST 2 discontinued (VST 3 is still supported, as is AU)
RTAS discontinued (AAX is still supported)
Rewire discontinued
32-Bit-support discontinued (operating system and DAW must provide 64-bit support)
For Melodyne 5 essential, assistant, editor and studio:
MacOS Intel Dual Core processor (Quad Core or better recommended), 4 GB RAM (8 GB or more recommended), macOS 10.12 or higher
WINDOWS Intel or AMD Dual Core processor (Quad Core or better recommended), 4 GB RAM (8 GB or more recommended), Windows 10 or higher,
ASIO-compatible audio hardware
Activation Computer-based or iLok USB dongle (2nd or 3rd generation), Melodyne essential only computer-based. Internet access is required for the first activation.
Interfaces Plug-in operation via VST3, AU or AAX. ARA integration with compatible DAWs, as set out in the section on DAW compatibility.
Technical changes with Melodyne 5:
Please note that due to Melodyne 5’s modernized software infrastructure, support for certain old standards has been discontinued. Those affected are:
VST 2 discontinued (VST 3 is still supported, as is AU)
RTAS discontinued (AAX is still supported)
Rewire discontinued
32-Bit-support discontinued (operating system and DAW must provide 64-bit support)
Focusrite Scarlett SOLO 3rd Gen --> Intel i3-9100, 8 GB RAM --> Windows 10 Pro --> Mixcraft 10.5 Pro Studio