Recording Amplitube 5 Expression Pedal

Support and feedback for Acoustica's Mixcraft audio mixing software.

Moderators: Acoustica Greg, Acoustica Eric, Acoustica Dan, rsaintjohn

Post Reply
User avatar
cbeattyjr
Posts: 66
Joined: Sun May 07, 2017 2:16 pm

Recording Amplitube 5 Expression Pedal

Post by cbeattyjr »

I want to record wah or whammy through Amplitube 5 VST3.

My understanding is as follows:

My interface is an ikMultimedia Axe I/O with an expression pedal plugged in.
Set up an audio track with Amplitube as an effect. Arm for record.
Set up a midi channel with Axe I/O as an input.

Ok so far. But my understanding is that I need to setup the midi output to be input to Amplitube 5. That's where I'm hitting a road block. I don't see how I send the expression pedal output to the Amplitube audio channel.

Any help will be appreciated!

Thanks
Chuck Beatty
Check out Electro-Roots Workshop on YouTube.
MSI GS63VR Stealth Pro Laptop (GEFORCE GTX 1060)
Presonus 1824 Interface
A bunch of other stuff!
GovernmentMule
Posts: 376
Joined: Thu Oct 30, 2014 3:58 pm

Re: Recording Amplitube 5 Expression Pedal

Post by GovernmentMule »

Start reading the Mixcraft 9 manual at page 214 ( Track Automation ). When you open an automation lane you should be able use the drop down menu and the parameter for the Amplitude Wah should be available. Then you just arm the automation track also with the audio track and start recording and the automation track should record the data for that parameter.
User avatar
cbeattyjr
Posts: 66
Joined: Sun May 07, 2017 2:16 pm

Re: Recording Amplitube 5 Expression Pedal

Post by cbeattyjr »

Start reading the Mixcraft 9 manual at page 214 ( Track Automation ). When you open an automation lane you should be able use the drop down menu and the parameter for the Amplitude Wah should be available. Then you just arm the automation track also with the audio track and start recording and the automation track should record the data for that parameter.
[/quote]

Thanks Govt Mule. That points me in the right direction. When I record the automation, it appears as a 'greyed out" wave form below the audio file. I'm not hearing the automation. Is that correct?
Chuck Beatty
Check out Electro-Roots Workshop on YouTube.
MSI GS63VR Stealth Pro Laptop (GEFORCE GTX 1060)
Presonus 1824 Interface
A bunch of other stuff!
User avatar
Rolling Estonian
Posts: 2055
Joined: Sun Jan 11, 2015 9:42 am
Location: MD/DC

Re: Recording Amplitube 5 Expression Pedal

Post by Rolling Estonian »

I think this may be it, on your pedal in Amplitube5 (vst3 gave me isssues but vst2 is fine), right click on the pedal, go to assign automation, select which you want to automate then give it a parameter, like 1. In MC open automation and select parameter 1 in the dropdown. Then arm the automation and you can go real time.

M
User avatar
cbeattyjr
Posts: 66
Joined: Sun May 07, 2017 2:16 pm

Re: Recording Amplitube 5 Expression Pedal

Post by cbeattyjr »

Thanks guys. I solved it. Had to change global parameter in Amplitube. Now the track lane is displayed as midi data!

Thanks again!
Chuck Beatty
Check out Electro-Roots Workshop on YouTube.
MSI GS63VR Stealth Pro Laptop (GEFORCE GTX 1060)
Presonus 1824 Interface
A bunch of other stuff!
Post Reply