Problem after resume from sleep

Support and feedback for Spin It Again.

Moderators: Acoustica Greg, Acoustica Chris, Acoustica Eric, Acoustica Dan

Post Reply
garyg
Posts: 2
Joined: Sat Dec 09, 2017 5:44 pm

Problem after resume from sleep

Post by garyg »

Steps to reproduce:
1. Run the app, capture audio from cassette tape.
2. Hit stop and go to the "Preview and Edit Recording" screen.
3. At this point, everything works - I can preview tracks or play any portion of the recording.
4. PC goes to sleep
5. PC resumes from sleep
6. The track preview and play audio buttons no longer work. Pressing either one does not play any audio and the Time counter does not change.

I did do a search in the forums for "sleep" but got no hits.

System details: Windows 7 Pro x64, Spin It Again v.2.5.b46 downloaded a few days ago.
User avatar
Acoustica Greg
Posts: 24479
Joined: Wed Mar 01, 2006 5:30 pm
Location: California
Contact:

Re: Problem after resume from sleep

Post by Acoustica Greg »

Hi,

Check and see if there are any updates for your computer's audio drivers. If there are, install them and see if that helps.

Greg
Mixcraft - The Musician's DAW
Check out our tutorial videos on YouTube: Mixcraft 10 University 101
garyg
Posts: 2
Joined: Sat Dec 09, 2017 5:44 pm

Re: Problem after resume from sleep

Post by garyg »

Hi,

Thanks for the suggestion. I finally had time to check the drivers -- they appear to be reasonably up to date (Sept. 2017). Windows was unable to find anything newer.

Thanks,

Gary
User avatar
Acoustica Greg
Posts: 24479
Joined: Wed Mar 01, 2006 5:30 pm
Location: California
Contact:

Re: Problem after resume from sleep

Post by Acoustica Greg »

Hi,

Instead of relying on Windows to find updated drivers, try going to the hardware manufacturer's web page for the latest drivers.

Greg
Mixcraft - The Musician's DAW
Check out our tutorial videos on YouTube: Mixcraft 10 University 101
Post Reply