Hi. I just noticed that in the bottom right hand corner of the software it tells me it's 44.1K, 32 bits stereo, 1.5 ms. I know the 44.1K is the sampling rate, the 1.5 ms is the latency, but I have the 64 bit version of Mixcraft Pros Studio 64-Bit Build 413 installed.
Does the 32-Bit mean that I'm using the 32-bit version instead of the 64-bit version?
I've attached a pic:
32 or 64 bit?
Moderators: Acoustica Greg, Acoustica Eric, Acoustica Dan, rsaintjohn
- Acoustica Greg
- Posts: 24648
- Joined: Wed Mar 01, 2006 5:30 pm
- Location: California
- Contact:
Re: 32 or 64 bit?
Hi,
That has to do with the audio format. Whether you're running 32- or 64-bit Mixcraft is shown in the title bar up at the top left corner of Mixcraft's screen.
Greg
That has to do with the audio format. Whether you're running 32- or 64-bit Mixcraft is shown in the title bar up at the top left corner of Mixcraft's screen.
Greg
Mixcraft - The Musician's DAW
Check out our tutorial videos on YouTube: Mixcraft 10 University 101
Check out our tutorial videos on YouTube: Mixcraft 10 University 101
-
- Posts: 10
- Joined: Tue Aug 13, 2013 8:19 am
Re: 32 or 64 bit?
Ahh, thanks for clarifying that. I was getting a few pops and clicks and in my troubleshooting process I noticed that bar at the bottom right.
Thanks again,
Thanks again,
Re: 32 or 64 bit?
It might have something to do with your interface operating at 1.5 ms latency, which is extremely low -- clearly too low for your setup. Bump it up one setting (i.e. 64 to 128, or whatever it is) and that should get rid of the pops and clicks.bombaycharlie wrote:... I was getting a few pops and clicks and in my troubleshooting process ...
I have my buffer size at 256, which works out to a comfortable 5.3 ms and still gives me the responsiveness I need.