Looking for a good gluing compressor

Discussions of VST and VST3 plugins for Mixcraft users.

Moderators: Acoustica Eric, rsaintjohn

Post Reply
Benjamin Drew
Posts: 22
Joined: Sat Mar 16, 2019 3:14 am

Looking for a good gluing compressor

Post by Benjamin Drew »

Right now, being a newbie I am playing more with presets. That being said, I had Density MK# compressor and was finally getting familiar with it's "Gluing" preset and tweaking it. But I highly suspect it's the very plugin wreaking havoc on mixcraft to the point it is unusable.

Any suggestions???
bigaquarium
Posts: 569
Joined: Thu Nov 16, 2017 3:21 am

Re: Looking for a good gluing compressor

Post by bigaquarium »

Morning,

Not sure what version you are running, but the Broadcast Multiband and Izotope Mastering Essentials that come with Mixcraft 8 ProStudio are both good for gluing the mix together, although the latter also has stereo spreading, reverb and other things built in.

Try Tokyo Dawn’s free Kotelnikov compressor, it is arguably the most popular freebie:

https://www.tokyodawn.net/tdr-kotelnikov/

-N
User avatar
jlouvar
Posts: 1718
Joined: Wed Jul 24, 2013 4:56 pm
Location: California - USA
Contact:

Re: Looking for a good gluing compressor

Post by jlouvar »

As long as it’s transparent and has all the basic controls, I think most compressor plugins work okay.
- Joe -

MX9PS, 64-bit, build 460. Windows 10, Intel i5, 64-bit, 1.8GHz, 8GB.
Reverbnation: https://www.reverbnation.com/joelouvar
Benjamin Drew
Posts: 22
Joined: Sat Mar 16, 2019 3:14 am

Re: Looking for a good gluing compressor

Post by Benjamin Drew »

Any ideas on general settings for glueing? Like a general starting point to start tweaking from? I got Mixcraft Pro 8.1.
bigaquarium
Posts: 569
Joined: Thu Nov 16, 2017 3:21 am

Re: Looking for a good gluing compressor

Post by bigaquarium »

Benjamin Drew wrote:Any ideas on general settings for glueing? Like a general starting point to start tweaking from? I got Mixcraft Pro 8.1.
Morning,

Absolutely impossible to say. My advice would be to get your mix down to -6 dB or so on the master channel before you even touch the master fader and run through the Izotope Mastering Essentials presets to see what you like, and go from there.

-N
Benjamin Drew
Posts: 22
Joined: Sat Mar 16, 2019 3:14 am

Re: Looking for a good gluing compressor

Post by Benjamin Drew »

Thanks. :) So far I've learned that much about mixing, getting all the instruments at appropriate levels to one another without any effects and making sure the master is at -6db for headroom.

Then start the compression on the master and an EQ as well for very light EQ enhancements.
User avatar
freightgod
Posts: 720
Joined: Thu Nov 29, 2012 5:18 am

Re: Looking for a good gluing compressor

Post by freightgod »

Benjamin Drew wrote:Any ideas on general settings for glueing? Like a general starting point to start tweaking from? I got Mixcraft Pro 8.1.
I recommend Google Glue.
Benjamin Drew
Posts: 22
Joined: Sat Mar 16, 2019 3:14 am

Re: Looking for a good gluing compressor

Post by Benjamin Drew »

freightgod wrote:
Benjamin Drew wrote:Any ideas on general settings for glueing? Like a general starting point to start tweaking from? I got Mixcraft Pro 8.1.
I recommend Google Glue.
So far I've had little luck with that. Your comment isn't very helpful.

All the stuff I have found thus far is vague. I figured if I asked directly I may come across a more direct answer.

Google has helped with most stuff though.
User avatar
Rolling Estonian
Posts: 2054
Joined: Sun Jan 11, 2015 9:42 am
Location: MD/DC

Re: Looking for a good gluing compressor

Post by Rolling Estonian »

Not free but I would highly recommend FabFilter ProC2. ProQ2 is also invaluable. They've both taught me a ton about eq and compression.

M
User avatar
Ian Craig
Posts: 1019
Joined: Sun Jan 22, 2017 7:15 pm
Location: Belfast, Northern Ireland, UK
Contact:

Re: Looking for a good gluing compressor

Post by Ian Craig »

MCompressor from MeldaProductions. It is free (it has a nag type line on the screen but it is free and works without limitations). Also the tutorial video on the Melda website is very good.
https://www.meldaproduction.com/MCompressor
Mixcraft 9 Pro Studio (build 470) recording output using MRecorder
AMD Ryzen 8 Core 3.0 GHz (40 GB Ram) & Intel i9 11th Gen 3.5 GHz (64GB Ram),
Windows 10 Professional
Focusrite Scarlett 2i2 & 8i6
jzero
Posts: 1
Joined: Tue Apr 23, 2019 9:54 am

Re: Looking for a good gluing compressor

Post by jzero »

Density MkII is a great compressor. I've used it successfully with FL Studio 20. Though I'm just using the Mixcraft demo (seeing if I want to switch) I will look tonight to see if Density works. I do know that it's a 32bit plugin. While 64bit FL Studio can run 32bit plugins in a "bridged" mode, I'm not sure if Mixcraft does...

In any case, I've had success with several Waves plugins for glue on the Mix bus:

https://www.waves.com/plugins/scheps-omni-channel
https://www.waves.com/plugins/v-comp
https://www.waves.com/plugins/cla-76-compressor-limiter
https://www.waves.com/plugins/ssl-g-mas ... compressor
https://www.waves.com/plugins/puigchild-compressor

I usually pick one of these with 2-4db of glue, then add another 2-4db with the L3 maximizing limiter:
https://www.waves.com/plugins/l3-multimaximizer

In case you're not aware, Waves have frequent sales. If you are patient any of their plugins can be had for $29 sales price and then combined with a %10 discount code.

If I had to pick a single plugin in that list above, I'd go with the Omni channel. It's got three different types of compression along with a ton of other features. It's basically a really flexible console in a box.
User avatar
jlouvar
Posts: 1718
Joined: Wed Jul 24, 2013 4:56 pm
Location: California - USA
Contact:

Re: Looking for a good gluing compressor

Post by jlouvar »

jzero wrote:I'm just using the Mixcraft demo (seeing if I want to switch)
Hello and welcome to the Acoustica forums.

I love Mixcraft 8 Pro... It’s Awesome.

Tip: If you’re considering getting Mixcraft 8, now is a good time because it’s on sale. I recommend Mixcraft 8 Pro... But the sale is almost over, so don’t wait too long.
- Joe -

MX9PS, 64-bit, build 460. Windows 10, Intel i5, 64-bit, 1.8GHz, 8GB.
Reverbnation: https://www.reverbnation.com/joelouvar
Post Reply