Does anyone know how to make the sustain pedal stay depressed after saving and closing a session? (And don't say take away its meds. ) I tried to save it as a user preset, but even that doesn't work.
I realize I can mix it to audio, but while I'm working on a piano track I don't always finish it in one session. Every time I open up the project I have to press down the sustain pedal on each track containing Pianissimo. And sometimes I have a few because I'm employing Blue Arp to some and not to others.
Sustain Pedal
Moderators: Acoustica Chris, Acoustica Eric, rsaintjohn
- Acoustica Greg
- Posts: 24716
- Joined: Wed Mar 01, 2006 5:30 pm
- Location: California
- Contact:
Re: Sustain Pedal
Hi,
You could add CC# 64 to the start of the MIDI clips:
Greg
You could add CC# 64 to the start of the MIDI clips:
Greg
Mixcraft - The Musician's DAW
Check out our tutorial videos on YouTube: Mixcraft 10 University 101
Check out our tutorial videos on YouTube: Mixcraft 10 University 101
Re: Sustain Pedal
Thanks Greg.
I tried this and am getting inconsistent results. The first track it didn't take, but the 2nd and 3rd did.
I will most likely just finish up the midi tracks, mix them to audio and be done with it.
Although I haven't tried your method on another piano. I could experiment.
J
I tried this and am getting inconsistent results. The first track it didn't take, but the 2nd and 3rd did.
I will most likely just finish up the midi tracks, mix them to audio and be done with it.
Although I haven't tried your method on another piano. I could experiment.
J
- Acoustica Greg
- Posts: 24716
- Joined: Wed Mar 01, 2006 5:30 pm
- Location: California
- Contact:
Re: Sustain Pedal
Hi,
It should always work, but it's up to the virtual instrument to play it correctly, and also make sure that the Hold Pedal command value is high enough and that there's no stray low Hold Pedal command value that's turning Hold Pedal off.
Greg
It should always work, but it's up to the virtual instrument to play it correctly, and also make sure that the Hold Pedal command value is high enough and that there's no stray low Hold Pedal command value that's turning Hold Pedal off.
Greg
Mixcraft - The Musician's DAW
Check out our tutorial videos on YouTube: Mixcraft 10 University 101
Check out our tutorial videos on YouTube: Mixcraft 10 University 101