phase

JimE · Post by **JimE** » Sat Nov 25, 2023 9:28 am

In MC9 Pro...how do you change the clip image to show peaks and valleys, to check if tracks are in phase??

TrevsAudio · Post by **TrevsAudio** » Sat Nov 25, 2023 11:36 am

Hi.

In Prefs, go to 'Display' and check the option 'Display volume as - Decibels'.

Sorry, didn't read properly - can't delete

JimE · Post by **JimE** » Sat Nov 25, 2023 6:08 pm

Hi, thanks, trying to post a pic but can't do it.
That was already checked. The usual wave form is kinda squiggly, the transient hit and decay all on the center line.
I'm trying to make it show PEAKS and VALLEYS, where there's pointy signal/peaks and valleys...above and below the line??
I have two drum tracks; I'm trying to see if they're in phase??
Appreciate you. J

TrevsAudio · Post by **TrevsAudio** » Sat Nov 25, 2023 6:22 pm

Have you checked the sound tab? You can change phase on one or either track there and should be able to detect any marked difference.

: Phase.png (69.79 KiB) Viewed 51051 times

JimE · Post by **JimE** » Sat Nov 25, 2023 11:07 pm

Hi, thanks, trying to post a pic but can't do it.
That was already checked. The usual wave form is kinda squiggly, the transient hit and decay all on the center line.
I'm trying to make it show PEAKS and VALLEYS, where there's pointy signal/peaks and valleys...above and below the line??
I have two drum tracks; I'm trying to see if they're in phase??
Appreciate you. J

Mark Bliss · Post by **Mark Bliss** » Sun Nov 26, 2023 11:22 am

You can "zoom all the way in" and "enlarge" the track and it helps, but I suspect what you really seek is the ability to zoom in to "sample level" which is a feature that Mixcraft does not support unfortunately.

I find it an oddly overdue oversight at this point.
And it's been a feature request for many versions.

JimE · Post by **JimE** » Wed Nov 29, 2023 11:34 pm

Hi, is there an email I can send a pic to??
Thanks, Jim

YouTube · Post by **Acoustica Greg** » Thu Nov 30, 2023 10:15 am

Hi,

There's no option to change the wave form to just show peaks and valleys, aside from the peaks and valleys the waveforms display right now. Increasing the track height can help you see more details in the waveform, particularly if the recording volume was low.

Greg

JimE · Post by **JimE** » Thu Nov 30, 2023 12:40 pm

Thanks, I have a pic I wish I could send...there is a way...just not in Mixcraft??

YouTube · Post by **Acoustica Greg** » Thu Nov 30, 2023 12:44 pm

1. Start a post, then select the attachments tab.
2. Select Add Files, then browse to the location of the image and attach it.
3. Click Place Inline to add the bit of text you can see in the screenshot.

Greg

: Attaching an image.; attachmentsforum.png (36.23 KiB) Viewed 50757 times

JimE · Post by **JimE** » Thu Nov 30, 2023 4:58 pm

Thanks, I have a pic I wish I could send...there is a way...just not in Mixcraft??

: wave form.jpg (24.94 KiB) Viewed 50738 times

If there's a way to this,
that would be great. This shot is from a Logic session I saw? Thank you!!

JimE · Post by **JimE** » Tue Dec 05, 2023 9:37 am

: wave form.jpg (24.94 KiB) Viewed 50334 times

Hi, yeah, was hoping to be able to see this view?? Thanks!!

YouTube · Post by **Acoustica Greg** » Tue Dec 05, 2023 10:06 am

Hi,

There's currently no option to display the waveform that way, but thank you for the suggestion!

Greg

phase

phase

Re: phase

Re: phase

Re: phase

Re: phase

Re: phase

Re: phase

Re: phase

Re: phase

Re: phase

Re: phase

Re: phase

Re: phase