I have a problem with Mixcraft 10.
When I record a guitar with a backing track, my guitar is out of sync.
Please listen to the brief sound file attached.
Has anyone any ideas as to how I can fix this?
M10 SOS!!!
Moderators: Acoustica Greg, Acoustica Eric, Acoustica Dan, rsaintjohn
M10 SOS!!!
- Attachments
-
- Out of Sync Sample 100bpm.mp3
- (526.21 KiB) Downloaded 27 times
- Acoustica Greg
- Posts: 24657
- Joined: Wed Mar 01, 2006 5:30 pm
- Location: California
- Contact:
Re: M10 SOS!!!
Hi,
If it's at the right tempo, but just not on the beat, you can reduce or turn off the snap setting at the top of the screen and move it so that it's back in time.
If it's at the wrong tempo, select the audio clip and look at it on the Sound tab. Over on the left, is it set to Use Project Tempo? If not, you could try that.
You can also hold down the Ctrl key and drag the end of the clip to time stretch it a bit manually.
If the tempo is not consistent, you could try warping / auto-warping the clip on the sound tab. Or splitting the clip and positioning as needed.
Greg
If it's at the right tempo, but just not on the beat, you can reduce or turn off the snap setting at the top of the screen and move it so that it's back in time.
If it's at the wrong tempo, select the audio clip and look at it on the Sound tab. Over on the left, is it set to Use Project Tempo? If not, you could try that.
You can also hold down the Ctrl key and drag the end of the clip to time stretch it a bit manually.
If the tempo is not consistent, you could try warping / auto-warping the clip on the sound tab. Or splitting the clip and positioning as needed.
Greg
Mixcraft - The Musician's DAW
Check out our tutorial videos on YouTube: Mixcraft 10 University 101
Check out our tutorial videos on YouTube: Mixcraft 10 University 101
Re: M10 SOS!!!
Hi Greg,
My Snap setting is always off.
I've tried selecting Project Tempo - with no change.
I shouldn't have to time stretch the clip - never had to do it before and shouldn't have to do it on everything I record.
Something has caused it to suddenly go like this.
Can't think what's caused it.
Maybe a reinstall is the way to go if it cannot be sorted eh!
Take care.
Rgds - Clive
My Snap setting is always off.
I've tried selecting Project Tempo - with no change.
I shouldn't have to time stretch the clip - never had to do it before and shouldn't have to do it on everything I record.
Something has caused it to suddenly go like this.
Can't think what's caused it.
Maybe a reinstall is the way to go if it cannot be sorted eh!
Take care.
Rgds - Clive
- Acoustica Greg
- Posts: 24657
- Joined: Wed Mar 01, 2006 5:30 pm
- Location: California
- Contact:
Re: M10 SOS!!!
Hi,
Snap can be helpful if the clip snaps to the beat.
If you just move the clip right or left, can you get it to line up with the beat properly?
Greg
Snap can be helpful if the clip snaps to the beat.
If you just move the clip right or left, can you get it to line up with the beat properly?
Greg
Mixcraft - The Musician's DAW
Check out our tutorial videos on YouTube: Mixcraft 10 University 101
Check out our tutorial videos on YouTube: Mixcraft 10 University 101
Re: M10 SOS!!!
Yes, Greg.
I've successfully moved the guitar track to match the beat.
C
I've successfully moved the guitar track to match the beat.
C
- Acoustica Greg
- Posts: 24657
- Joined: Wed Mar 01, 2006 5:30 pm
- Location: California
- Contact:
Re: M10 SOS!!!
Hi,
Okay, then maybe you're dealing with some audio latency. If you go into Mixcraft's sound device preferences, what do you have selected as your playback device? Which mode are you using WaveRT, ASIO, or Wave?
Greg
Okay, then maybe you're dealing with some audio latency. If you go into Mixcraft's sound device preferences, what do you have selected as your playback device? Which mode are you using WaveRT, ASIO, or Wave?
Greg
Mixcraft - The Musician's DAW
Check out our tutorial videos on YouTube: Mixcraft 10 University 101
Check out our tutorial videos on YouTube: Mixcraft 10 University 101
- Acoustica Greg
- Posts: 24657
- Joined: Wed Mar 01, 2006 5:30 pm
- Location: California
- Contact:
Re: M10 SOS!!!
Hi,
Try ASIO or WaveRT mode and you'll have lower latency. ASIO should be best, but if that doesn't work well for you, you can also try WaveRT.
You could also try downloading and installing the latest driver from Focusrite: https://downloads.focusrite.com/focusrite
Greg
Try ASIO or WaveRT mode and you'll have lower latency. ASIO should be best, but if that doesn't work well for you, you can also try WaveRT.
You could also try downloading and installing the latest driver from Focusrite: https://downloads.focusrite.com/focusrite
Greg
Mixcraft - The Musician's DAW
Check out our tutorial videos on YouTube: Mixcraft 10 University 101
Check out our tutorial videos on YouTube: Mixcraft 10 University 101
Re: M10 SOS!!!
Hi Greg,
I'm pleased to say that the problem is now sorted.
Thanks for your help.
Rgds - CLIVE
I'm pleased to say that the problem is now sorted.
Thanks for your help.
Rgds - CLIVE
- Attachments
-
- MC SOUND DEVICE.PNG (69.91 KiB) Viewed 365 times