Just FYI,
It turns out that a component of the Stem Separation feature requires AVX instruction support, and not all CPUs support AVX. We're looking into possible workarounds for this issue, but this is the reason why a few people are able to install the stem separation files correctly, but still can't use it.
Here are a few examples of processors that don't support AVX:
Intel(R) Core(TM) i7 CPU 920
Intel(R) Xeon(R) CPU E5620
Intel(R) Celeron(R) CPU N3050
Intel(R) Core(TM) i5 CPU 650
Intel(R) Core(TM) i3 CPU M 330
Note: you can google your processor's specs to see if your computer supports AVX.
Thanks to stavka for cluing us into this!
Greg
Stem Separtion feature requires CPUs that offer AVX instructions
Moderators: Acoustica Greg, Acoustica Eric, Acoustica Dan, rsaintjohn
- Acoustica Greg
- Posts: 24701
- Joined: Wed Mar 01, 2006 5:30 pm
- Location: California
- Contact:
Stem Separtion feature requires CPUs that offer AVX instructions
Mixcraft - The Musician's DAW
Check out our tutorial videos on YouTube: Mixcraft 10 University 101
Check out our tutorial videos on YouTube: Mixcraft 10 University 101
Re: Stem Separtion feature requires CPUs that offer AVX instructions
I believe there are 3 variants of AVX.
AVX, AVX512 and AVX2
Sometimes you can enable AVX in the BIOS by disabling the E-cores.
Btw. Massive X from Native Instruments also requires AVX instructions. So if you already have Massive X running, then you also have an AVX compatible processor.
Patrick
AVX, AVX512 and AVX2
Sometimes you can enable AVX in the BIOS by disabling the E-cores.
Btw. Massive X from Native Instruments also requires AVX instructions. So if you already have Massive X running, then you also have an AVX compatible processor.
Patrick
Re: Stem Separtion feature requires CPUs that offer AVX instructions
Hi,
my not new machine runs with processor: Intel(R) Celeron(R) CPU G550 @ 2.60 GHz 2.60 GHz
I use this: https://www.stemroller.com/ to split stems.
It works fine.
Thanks guys.
:-j
my not new machine runs with processor: Intel(R) Celeron(R) CPU G550 @ 2.60 GHz 2.60 GHz
I use this: https://www.stemroller.com/ to split stems.
It works fine.
Thanks guys.
:-j