Problems with mixcraft and my mixboard

JSealock · Post by **JSealock** » Fri Apr 14, 2006 8:59 am

i try to use my mixboard with mixcraft with no effect the mix board i have is the tapco 6306 6 channel mixer, it has phantom power with a condensor mic can any one help me out?

Gman · Post by **Gman** » Fri Apr 14, 2006 9:14 am

You will have to be a little more specific.

Do you not get any input at all? (Meaning no sound is being recorded?)

Guest · Post by **Guest** » Fri Apr 14, 2006 7:54 pm

ive got my mixer hooked up to my computer, and my microphone will only work if i have the DBs set extremly high, and the mixer doesnt change the sound of the voice or nothing with mixcraft, its like it doesnt want to work with it.

tokyodan · Post by **tokyodan** » Sat Apr 15, 2006 2:12 pm

I got a Tapco Blend 6 and it works great with Mixcraft. The maix mix output of the Tapco goes to the Line In of my computer. The gain for the channel 1 (the mic) is set at about 1 o'clock and all the other level/volume controls of the Tapco are set at optimum of 12 o'clock.

The recording window in Mixcraft is set to Source = Line In, and the level is set two clicks from Max.

Does you mic record at suitable levels with another recording program? Download Audacity (it's free) to give your mic a test.

Tokyo Dan
'What's Happening In Tokyo' podcast
http://www.WHITokyo.info
Japanese Independent Music
http://www.JIndies.com

Problems with mixcraft and my mixboard

Problems with mixcraft and my mixboard

Mixcarft works great with Tapco Blend 6.