[Solved] Virtual instrument note issue
Moderators: Acoustica Greg, Acoustica Eric, Acoustica Dan, rsaintjohn
-
- Posts: 12
- Joined: Sat Feb 02, 2013 2:22 pm
[Solved] Virtual instrument note issue
Hi
I'm trying to route a midi track to a VSTI, and the vsti only accepts input from 1 midi channel. Anyway, the midi track seems to keep changing midi channels for each note, and I really want to reset them so they will only use midi channel 1!
Thanks
I'm trying to route a midi track to a VSTI, and the vsti only accepts input from 1 midi channel. Anyway, the midi track seems to keep changing midi channels for each note, and I really want to reset them so they will only use midi channel 1!
Thanks
Last edited by MrRatermat on Thu Aug 29, 2013 12:39 pm, edited 1 time in total.
Re: Virtual instrument note issue
On the drop down for choosing input do you have it set to receive from all channels?
Mark Bowie
Illinois
It's all in your mind
Illinois
It's all in your mind
-
- Posts: 12
- Joined: Sat Feb 02, 2013 2:22 pm
Re: Virtual instrument note issue
I'm not talking about receiving input from a midi channel, the midi clips are sending midi data to my virtual instruments on midi 2 and midi 3 (Changes between each note, I dont want this), but I want them to send on midi 1 only.Mab098157 wrote:On the drop down for choosing input do you have it set to receive from all channels?
Re: Virtual instrument note issue
On the midi track do you see a little plus (+) sign in the lower left corner? If so clciking this will expand the indiviudal midi out tracks and you can set the outputs to be all on one channel.
Last edited by outteh on Thu Aug 29, 2013 12:08 pm, edited 1 time in total.
-
- Posts: 12
- Joined: Sat Feb 02, 2013 2:22 pm
Re: Virtual instrument note issue
That changes the audio output, I need to change the midi channel the instrument tracks use
Re: Virtual instrument note issue
What vsti are you referring to and what midi input device are you using (or is the track a pre-made midi track)?
-
- Posts: 12
- Joined: Sat Feb 02, 2013 2:22 pm
Re: Virtual instrument note issue
ShortCircuit, which only accepts 1 midi channel at onceoutteh wrote:What vsti are you referring to?
-
- Posts: 12
- Joined: Sat Feb 02, 2013 2:22 pm
Re: Virtual instrument note issue
And I'm using a pre-made midi track.outteh wrote:What vsti are you referring to and what midi input device are you using (or is the track a pre-made midi track)?
-
- Posts: 12
- Joined: Sat Feb 02, 2013 2:22 pm
Re: Virtual instrument note issue
Heres the problem:
I know what channel they are because ShortCircuit is only playing the specific notes based on its midi channel when it matches.
I want all these notes to use the first midi channel so they all will play when I use ShortCircuit.
I know what channel they are because ShortCircuit is only playing the specific notes based on its midi channel when it matches.
I want all these notes to use the first midi channel so they all will play when I use ShortCircuit.
- Acoustica Greg
- Posts: 24652
- Joined: Wed Mar 01, 2006 5:30 pm
- Location: California
- Contact:
Re: Virtual instrument note issue
Hi,
Select the notes, then right-click on them and select Note Properties. You can change the MIDI channel there.
You can do that with groups of notes, just drag a highlight over them.
Greg
Select the notes, then right-click on them and select Note Properties. You can change the MIDI channel there.
You can do that with groups of notes, just drag a highlight over them.
Greg
-
- Posts: 12
- Joined: Sat Feb 02, 2013 2:22 pm
Re: Virtual instrument note issue
Oh thank you so much! You've saved my baconAcoustica Greg wrote:Hi,
Select the notes, then right-click on them and select Note Properties. You can change the MIDI channel there.
You can do that with groups of notes, just drag a highlight over them.
Greg
- Acoustica Greg
- Posts: 24652
- Joined: Wed Mar 01, 2006 5:30 pm
- Location: California
- Contact:
Re: [Solved] Virtual instrument note issue
Hi,
You're welcome! Imported .mid files often have all sorts of crazy CC messages and other settings in them, so you just have to go through and set things the way you want it.
Greg
You're welcome! Imported .mid files often have all sorts of crazy CC messages and other settings in them, so you just have to go through and set things the way you want it.
Greg
-
- Posts: 12
- Joined: Sat Feb 02, 2013 2:22 pm
Re: [Solved] Virtual instrument note issue
Yeah, it would be nice if I could import mid files into my projects as 1 merged track without any CC messages that change volume, velocity, pitch wheel, and other annoying things that I wish would just be left alone. I hope something like this would be possible in Mixcraft 7!Acoustica Greg wrote:Hi,
You're welcome! Imported .mid files often have all sorts of crazy CC messages and other settings in them, so you just have to go through and set things the way you want it.
Greg
- Acoustica Greg
- Posts: 24652
- Joined: Wed Mar 01, 2006 5:30 pm
- Location: California
- Contact:
Re: [Solved] Virtual instrument note issue
Hi,
Mixcraft 6 strips program change commands automatically (it's a preference that's on by default).
You might try right-clicking on an instrument track and selecting "Add Sound File." Importing a .mid file that way often produces less additional stuff than using "Open Project" from the file menu.
Thanks for the suggestion!
Greg
Mixcraft 6 strips program change commands automatically (it's a preference that's on by default).
You might try right-clicking on an instrument track and selecting "Add Sound File." Importing a .mid file that way often produces less additional stuff than using "Open Project" from the file menu.
Thanks for the suggestion!
Greg