Blackstar ID30 TVP
Moderators: Acoustica Greg, Acoustica Chris, Acoustica Eric, Acoustica Dan, rsaintjohn
- Pete Stobbs
- Posts: 125
- Joined: Sun Aug 21, 2011 9:07 am
- Location: Dursley UK
- Contact:
Blackstar ID30 TVP
Hi all,
Just got a Blackstar ID30 TVP. How do I set it up for recording in M7 64?
Posted on the Blackstar forum and the post got deleted.
Just got a Blackstar ID30 TVP. How do I set it up for recording in M7 64?
Posted on the Blackstar forum and the post got deleted.
Win 8.1
8 gig ram
AMD A4 6210 1.8 GHz
Focusrite solo.
Hughes & Kettner TubeMeister 5 head.
Blackstar ID30 TVP
https://soundcloud.com/pete-stobbs
https://soundcloud.com/toltec-jive
8 gig ram
AMD A4 6210 1.8 GHz
Focusrite solo.
Hughes & Kettner TubeMeister 5 head.
Blackstar ID30 TVP
https://soundcloud.com/pete-stobbs
https://soundcloud.com/toltec-jive
- Acoustica Greg
- Posts: 24657
- Joined: Wed Mar 01, 2006 5:30 pm
- Location: California
- Contact:
Re: Blackstar ID30 TVP
Hi,
I can't tell if they provide any audio drivers for that amp. Googling around, it seems like people might use ASIO4All with it.
What have you tried? You've got it connected via USB? Does it show up as a recording device in Core Audio (WaveRT Mode)? Have you armed an audio track and tried recording something?
Greg
I can't tell if they provide any audio drivers for that amp. Googling around, it seems like people might use ASIO4All with it.
What have you tried? You've got it connected via USB? Does it show up as a recording device in Core Audio (WaveRT Mode)? Have you armed an audio track and tried recording something?
Greg
Mixcraft - The Musician's DAW
Check out our tutorial videos on YouTube: Mixcraft 10 University 101
Check out our tutorial videos on YouTube: Mixcraft 10 University 101
Re: Blackstar ID30 TVP
As far as I know it doesn't a driver. Just connect up via USB and MC should find it in the 'arm' drop-down.
- Pete Stobbs
- Posts: 125
- Joined: Sun Aug 21, 2011 9:07 am
- Location: Dursley UK
- Contact:
Re: Blackstar ID30 TVP
Sorted. Looks like I have to use WAV rather than Asio.
I'll see how it performs when there are more tracks recorded.
I'll see how it performs when there are more tracks recorded.
Win 8.1
8 gig ram
AMD A4 6210 1.8 GHz
Focusrite solo.
Hughes & Kettner TubeMeister 5 head.
Blackstar ID30 TVP
https://soundcloud.com/pete-stobbs
https://soundcloud.com/toltec-jive
8 gig ram
AMD A4 6210 1.8 GHz
Focusrite solo.
Hughes & Kettner TubeMeister 5 head.
Blackstar ID30 TVP
https://soundcloud.com/pete-stobbs
https://soundcloud.com/toltec-jive
- Acoustica Greg
- Posts: 24657
- Joined: Wed Mar 01, 2006 5:30 pm
- Location: California
- Contact:
Re: Blackstar ID30 TVP
Hi,
Unless you've got Windows XP, you should use Core Audio (WaveRT).
If your latency is too high, try exclusive mode.
If you've got Windows XP, you could give ASIO4All a try.
Greg
Unless you've got Windows XP, you should use Core Audio (WaveRT).
If your latency is too high, try exclusive mode.
If you've got Windows XP, you could give ASIO4All a try.
Greg
Mixcraft - The Musician's DAW
Check out our tutorial videos on YouTube: Mixcraft 10 University 101
Check out our tutorial videos on YouTube: Mixcraft 10 University 101
- Pete Stobbs
- Posts: 125
- Joined: Sun Aug 21, 2011 9:07 am
- Location: Dursley UK
- Contact:
Re: Blackstar ID30 TVP
Hi Greg,
Tried all sorts of combinations. The latency makes it unusable really.
Looks like I can take this route.
27. Emulated Output/Headphone Out
This output emulates the tonal characteristics of a guitar speaker cabinet and
provides a natural tone for connection to a recording device or mixing desk.
To make full use of the stereo effects, use a stereo jack to two mono jacks splitter
lead to feed two channels of the recording device or mixer. The output will also
function into a mono guitar type lead. Always use a good quality screened lead.
Turning the Volume knob (4) will control the Emulated Output level. The Master
Volume only affects any connected speaker(s)/cabinet(s).
NOTE: To ‘silently’ record, set the Master Volume to zero. You may also record
from this output without a loudspeaker connected, but ensure that no loudspeaker
leads are connected to any of the loudspeaker output jack sockets of the amplifier,
as this will defeat the load protection circuit and will cause damage to the amplifier.
Tried all sorts of combinations. The latency makes it unusable really.
Looks like I can take this route.
27. Emulated Output/Headphone Out
This output emulates the tonal characteristics of a guitar speaker cabinet and
provides a natural tone for connection to a recording device or mixing desk.
To make full use of the stereo effects, use a stereo jack to two mono jacks splitter
lead to feed two channels of the recording device or mixer. The output will also
function into a mono guitar type lead. Always use a good quality screened lead.
Turning the Volume knob (4) will control the Emulated Output level. The Master
Volume only affects any connected speaker(s)/cabinet(s).
NOTE: To ‘silently’ record, set the Master Volume to zero. You may also record
from this output without a loudspeaker connected, but ensure that no loudspeaker
leads are connected to any of the loudspeaker output jack sockets of the amplifier,
as this will defeat the load protection circuit and will cause damage to the amplifier.
Win 8.1
8 gig ram
AMD A4 6210 1.8 GHz
Focusrite solo.
Hughes & Kettner TubeMeister 5 head.
Blackstar ID30 TVP
https://soundcloud.com/pete-stobbs
https://soundcloud.com/toltec-jive
8 gig ram
AMD A4 6210 1.8 GHz
Focusrite solo.
Hughes & Kettner TubeMeister 5 head.
Blackstar ID30 TVP
https://soundcloud.com/pete-stobbs
https://soundcloud.com/toltec-jive
Re: Blackstar ID30 TVP
Yep, this is the way to go.
Really latency shouldn't be an issue for anybody these days, there's no real reason to monitor back through the DAW, unless the computer itself is generating the sounds.
Really latency shouldn't be an issue for anybody these days, there's no real reason to monitor back through the DAW, unless the computer itself is generating the sounds.
- Acoustica Greg
- Posts: 24657
- Joined: Wed Mar 01, 2006 5:30 pm
- Location: California
- Contact:
Re: Blackstar ID30 TVP
Hi,
For that method, you need a good way to input the audio to your computer. If your computer doesn't have a "Line In" input you'll need some kind of audio interface. Maybe you already have one?
Microphone inputs are not appropriate for this type of recording because they have too much gain.
Greg
For that method, you need a good way to input the audio to your computer. If your computer doesn't have a "Line In" input you'll need some kind of audio interface. Maybe you already have one?
Microphone inputs are not appropriate for this type of recording because they have too much gain.
Greg
Mixcraft - The Musician's DAW
Check out our tutorial videos on YouTube: Mixcraft 10 University 101
Check out our tutorial videos on YouTube: Mixcraft 10 University 101
Re: Blackstar ID30 TVP
That's not how I see it. The amp has its own interface, so no need for an audio input. Presumably the OP can hear what is already recorded coming back through monitors or headphones of some description so he just needs to manually mix the amp's output with the DAW's output in order to monitor them both together while recording.Acoustica Greg wrote:Hi,
For that method, you need a good way to input the audio to your computer.
- Pete Stobbs
- Posts: 125
- Joined: Sun Aug 21, 2011 9:07 am
- Location: Dursley UK
- Contact:
Re: Blackstar ID30 TVP
Win 8.1Acoustica Greg wrote:Hi,
For that method, you need a good way to input the audio to your computer. If your computer doesn't have a "Line In" input you'll need some kind of audio interface. Maybe you already have one?
Microphone inputs are not appropriate for this type of recording because they have too much gain.
Greg
8 gig ram
AMD A4 6210 1.8 GHz
Focusrite solo.
Hughes & Kettner TubeMeister 5 head.
Blackstar ID30 TVP
Win 8.1
8 gig ram
AMD A4 6210 1.8 GHz
Focusrite solo.
Hughes & Kettner TubeMeister 5 head.
Blackstar ID30 TVP
https://soundcloud.com/pete-stobbs
https://soundcloud.com/toltec-jive
8 gig ram
AMD A4 6210 1.8 GHz
Focusrite solo.
Hughes & Kettner TubeMeister 5 head.
Blackstar ID30 TVP
https://soundcloud.com/pete-stobbs
https://soundcloud.com/toltec-jive
- Acoustica Greg
- Posts: 24657
- Joined: Wed Mar 01, 2006 5:30 pm
- Location: California
- Contact:
Re: Blackstar ID30 TVP
Hi,aj113 wrote:That's not how I see it. The amp has its own interface, so no need for an audio input. Presumably the OP can hear what is already recorded coming back through monitors or headphones of some description so he just needs to manually mix the amp's output with the DAW's output in order to monitor them both together while recording.
But in order to record the amp, you need a good audio feed coming into the computer. Since Pete has a Scarlett Solo, he could go from the amp to the Scarlett Solo.
Unless of course he's got a Line In input. Most laptops just have mic inputs, which would cause distortion in the loud parts of the recording since you're feeding a line level signal into a microphone input, which isn't designed for that.
Greg
Mixcraft - The Musician's DAW
Check out our tutorial videos on YouTube: Mixcraft 10 University 101
Check out our tutorial videos on YouTube: Mixcraft 10 University 101
Re: Blackstar ID30 TVP
OK maybe I'm misunderstanding something. If the amp has its own built in usb audio interface why do you need to send audio anywhere at all? As I see it you plug in the usb and the DAW finds the amp. Have I got that wrong?Acoustica Greg wrote:...But in order to record the amp, you need a good audio feed coming into the computer..
- Pete Stobbs
- Posts: 125
- Joined: Sun Aug 21, 2011 9:07 am
- Location: Dursley UK
- Contact:
Re: Blackstar ID30 TVP
The latency is crap!aj113 wrote:OK maybe I'm misunderstanding something. If the amp has its own built in usb audio interface why do you need to send audio anywhere at all? As I see it you plug in the usb and the DAW finds the amp. Have I got that wrong?Acoustica Greg wrote:...But in order to record the amp, you need a good audio feed coming into the computer..
Win 8.1
8 gig ram
AMD A4 6210 1.8 GHz
Focusrite solo.
Hughes & Kettner TubeMeister 5 head.
Blackstar ID30 TVP
https://soundcloud.com/pete-stobbs
https://soundcloud.com/toltec-jive
8 gig ram
AMD A4 6210 1.8 GHz
Focusrite solo.
Hughes & Kettner TubeMeister 5 head.
Blackstar ID30 TVP
https://soundcloud.com/pete-stobbs
https://soundcloud.com/toltec-jive
Re: Blackstar ID30 TVP
You're missing the point. There is no latency. Turn off the channel monitoring and turn your amp up so that you can hear it 'live'.