Hi,
i am testing Mixcraft 9 with my soundmodul SD 1000 (Keytron). If i select my soundmodul, then i cant select the sounds (from 1 to 127) of the soundmodul. Has anyone an idea to fix the problem?
Mixcraft and Keytron SD 1000
Moderators: Acoustica Greg, Acoustica Eric, Acoustica Dan, rsaintjohn
Mixcraft and Keytron SD 1000
- Attachments
-
- Screenshot.png (59.36 KiB) Viewed 675 times
- Acoustica Greg
- Posts: 24657
- Joined: Wed Mar 01, 2006 5:30 pm
- Location: California
- Contact:
Re: Mixcraft and Keytron SD 1000
Hi,
When you select your MIDI device there, you are setting Mixcraft up to send MIDI out to your device. This means you could put MIDI notes on that track, and they would be transmitted to the Keytron SD 1000 to interpret.
If you want to capture the sounds of your Keytron SD 1000 in Mixcraft, you'd have to make an audio connection from the Keytron to your computer, and then record the audio on an audio track.
Greg
When you select your MIDI device there, you are setting Mixcraft up to send MIDI out to your device. This means you could put MIDI notes on that track, and they would be transmitted to the Keytron SD 1000 to interpret.
If you want to capture the sounds of your Keytron SD 1000 in Mixcraft, you'd have to make an audio connection from the Keytron to your computer, and then record the audio on an audio track.
Greg
Mixcraft - The Musician's DAW
Check out our tutorial videos on YouTube: Mixcraft 10 University 101
Check out our tutorial videos on YouTube: Mixcraft 10 University 101
Re: Mixcraft and Keytron SD 1000
Hi, I am sorry that I have only now answered. In the Window, i can only select the MidiChanel but not one of the 127 Instuments...
-
- Posts: 1012
- Joined: Sat Sep 16, 2017 3:09 pm
Re: Mixcraft and Keytron SD 1000
Because mixcraft is sending your device the MIDI information, you can set the Program Change in the Piano Roll window at the bottom to control the patches on your module. Right click to Add the program change control at the point in the piano roll where you want the patch change to occur. Right click and Edit Controller to set the value to something else.