Rising tone/beep sound in mixdown

Support and feedback for Acoustica's Mixcraft audio mixing software.

Moderators: Acoustica Chris, Acoustica Eric, Acoustica Dan, Acoustica Greg

Post Reply
BuuGames
Posts: 2
Joined: Mon Jun 29, 2020 12:45 pm

Rising tone/beep sound in mixdown

Post by BuuGames » Mon Jun 29, 2020 12:49 pm

So basically in playback, everything is fine, but the moment I mixdown it has a continuous beep sound that gets higher pitched from about midway to the end of the track. it keeps rising. is this a problem or am I hitting a plunging error? it's strange because I don't hear anything in playback at all. it sounds as intended

Thanks for the help, it is not a big project just testing some IR's and wanted to show my friend. I could screen record I guess but it is not the same.

User avatar
jlouvar
Posts: 1695
Joined: Wed Jul 24, 2013 4:56 pm
Location: California - USA
Contact:

Re: Rising tone/beep sound in mixdown

Post by jlouvar » Mon Jun 29, 2020 1:04 pm

BuuGames wrote:
Mon Jun 29, 2020 12:49 pm
So basically in playback, everything is fine, but the moment I mixdown it has a continuous beep sound that gets higher pitched from about midway to the end of the track. it keeps rising. is this a problem or am I hitting a plunging error? it's strange because I don't hear anything in playback at all. it sounds as intended

Thanks for the help, it is not a big project just testing some IR's and wanted to show my friend. I could screen record I guess but it is not the same.
Hello and welcome to the MIxcraft forum.

Hmm, yeah that seems like a problem to me... unfortunately you didn’t post enough information for us to help you solve the problem. Maybe this thread will help you: https://forums.acoustica.com/viewtopic.php?f=4&t=24566
- Joe -

MX9PS, 64-bit, build 460. Windows 10, Intel i5, 64-bit, 1.8GHz, 8GB.
Reverbnation: https://www.reverbnation.com/joelouvar

BuuGames
Posts: 2
Joined: Mon Jun 29, 2020 12:45 pm

Re: Rising tone/beep sound in mixdown

Post by BuuGames » Mon Jun 29, 2020 1:14 pm

fixed, just had to mix down to stems then import into a blank session, haven't had trouble before apart from crashing when using Melodyne. was mainly just checking it wasn't a common thing and I was doing something really stupid :P :D Is it best to disable the master track FX when doing this and applying after or does it not mix this anyway? I have never done the stem method before./

User avatar
jlouvar
Posts: 1695
Joined: Wed Jul 24, 2013 4:56 pm
Location: California - USA
Contact:

Re: Rising tone/beep sound in mixdown

Post by jlouvar » Mon Jun 29, 2020 1:35 pm

I don’t know what you did so I don’t know, but if you got it working that’s all that matters. Cheers
- Joe -

MX9PS, 64-bit, build 460. Windows 10, Intel i5, 64-bit, 1.8GHz, 8GB.
Reverbnation: https://www.reverbnation.com/joelouvar

Post Reply