Hi Guys.
I'm using Mixcraft 9 Pro.
Audio Interface Behringer U Phoria UMC22
For some reason I'm getting a lot of static and noise on my Audio recordings.
Its never been there before and has suddenly arrived.
I've checked cables etc and cant locate the problem
Noise Issue
Moderators: Acoustica Greg, Acoustica Eric, Acoustica Dan, rsaintjohn
- Acoustica Greg
- Posts: 24653
- Joined: Wed Mar 01, 2006 5:30 pm
- Location: California
- Contact:
Re: Noise Issue
Hi,
Try to isolate where the noise is coming from. Are you using a microphone? Can you try different microphones and cables?
If you mix down to an audio file, does the audio file have the noise and static?
Greg
Try to isolate where the noise is coming from. Are you using a microphone? Can you try different microphones and cables?
If you mix down to an audio file, does the audio file have the noise and static?
Greg
Mixcraft - The Musician's DAW
Check out our tutorial videos on YouTube: Mixcraft 10 University 101
Check out our tutorial videos on YouTube: Mixcraft 10 University 101
Re: Noise Issue
Hi Greg,
Its coming from the Mic alright.
I've stuck a brand mew cable on and the mic is new also.
Its worth a shot trying another mic cable.
I'll give that a shot when the stores open tomorrow
Thanks
Its coming from the Mic alright.
I've stuck a brand mew cable on and the mic is new also.
Its worth a shot trying another mic cable.
I'll give that a shot when the stores open tomorrow
Thanks
- Acoustica Greg
- Posts: 24653
- Joined: Wed Mar 01, 2006 5:30 pm
- Location: California
- Contact:
Re: Noise Issue
Hi,
Which microphone? Does it require phantom power? Is the +48V switch on or off?
Greg
Which microphone? Does it require phantom power? Is the +48V switch on or off?
Greg
Mixcraft - The Musician's DAW
Check out our tutorial videos on YouTube: Mixcraft 10 University 101
Check out our tutorial videos on YouTube: Mixcraft 10 University 101
- TrevsAudio
- Posts: 3701
- Joined: Sun May 06, 2012 1:59 am
- Location: Rhode Island
Re: Noise Issue
Hi
Also, depending on which mic you have, check the male connector on the barrel.
I bought a brand new one from Sweetwater and the fitting was totally loose. There's a micro screw that needed tightening.
Also, depending on which mic you have, check the male connector on the barrel.
I bought a brand new one from Sweetwater and the fitting was totally loose. There's a micro screw that needed tightening.
Old Dudes Rock!
Trevor
OFC™ Founding Member
Dell 3050 SFF; i3; 32 gig RAM; MX 8, 9 and 10.5 Pro; Win 11 Pro
Focusrite Solo; Sennheiser HD650 cans
Sample Projects: https://soundcloud.com/trevs_audio
YouTube Channel: https://www.youtube.com/@trevsaudio
Trevor
OFC™ Founding Member
Dell 3050 SFF; i3; 32 gig RAM; MX 8, 9 and 10.5 Pro; Win 11 Pro
Focusrite Solo; Sennheiser HD650 cans
Sample Projects: https://soundcloud.com/trevs_audio
YouTube Channel: https://www.youtube.com/@trevsaudio
Re: Noise Issue
I’m using a Sure Beta 58.
The noise has suddenly appeared.
It was never an issue before.
I’ve ordered a replacement mic cable to eliminate that one
The noise has suddenly appeared.
It was never an issue before.
I’ve ordered a replacement mic cable to eliminate that one