I just noticed with 2 project that were originally made in MC9 don't display the routing/output buttons in mixer panel. The panel that buttons go on is there but no buttons. When I click library then go back to mixer routing/output buttons will flash for 1 second then nothing.
.
opening MC9 project in MC10.1
Moderators: Acoustica Greg, Acoustica Eric, Acoustica Dan, rsaintjohn
-
- Posts: 282
- Joined: Sat Sep 12, 2015 3:07 pm
- Location: Southern New England
opening MC9 project in MC10.1
- Attachments
-
- output routing 3.jpg (199.5 KiB) Viewed 293 times
-
- output routing 1.jpg (159.04 KiB) Viewed 293 times
10.5 Pro studio build 596
Dell XPS i7-10700 2.9Ghz
48 GB RAM
Windows 10
Dell XPS i7-10700 2.9Ghz
48 GB RAM
Windows 10
- TrevsAudio
- Posts: 3702
- Joined: Sun May 06, 2012 1:59 am
- Location: Rhode Island
Re: opening MC9 project in MC10.1
Try this link in Gregg's post (2nd post)
https://forums.acoustica.com/viewtopic. ... 44#p155044
https://forums.acoustica.com/viewtopic. ... 44#p155044
Old Dudes Rock!
Trevor
OFC™ Founding Member
Dell 3050 SFF; i3; 32 gig RAM; MX 8, 9 and 10.5 Pro; Win 11 Pro
Focusrite Solo; Sennheiser HD650 cans
Sample Projects: https://soundcloud.com/trevs_audio
YouTube Channel: https://www.youtube.com/@trevsaudio
Trevor
OFC™ Founding Member
Dell 3050 SFF; i3; 32 gig RAM; MX 8, 9 and 10.5 Pro; Win 11 Pro
Focusrite Solo; Sennheiser HD650 cans
Sample Projects: https://soundcloud.com/trevs_audio
YouTube Channel: https://www.youtube.com/@trevsaudio
-
- Posts: 282
- Joined: Sat Sep 12, 2015 3:07 pm
- Location: Southern New England
Re: opening MC9 project in MC10.1
i don't know what that means Trev. Doesn't seem to pertain to me.
I'm opening a project in 10.1 that was originally started in 9.
At one point output/routing were there in 10 for same projects.
I'm opening a project in 10.1 that was originally started in 9.
At one point output/routing were there in 10 for same projects.
10.5 Pro studio build 596
Dell XPS i7-10700 2.9Ghz
48 GB RAM
Windows 10
Dell XPS i7-10700 2.9Ghz
48 GB RAM
Windows 10
- Acoustica Greg
- Posts: 24657
- Joined: Wed Mar 01, 2006 5:30 pm
- Location: California
- Contact:
Re: opening MC9 project in MC10.1
Hi,
You're using build 587? Send us the Mixcraft 9 project and we'll see if that happens for us: https://acoustica.kayako.com/conversation/new
Greg
You're using build 587? Send us the Mixcraft 9 project and we'll see if that happens for us: https://acoustica.kayako.com/conversation/new
Greg
Mixcraft - The Musician's DAW
Check out our tutorial videos on YouTube: Mixcraft 10 University 101
Check out our tutorial videos on YouTube: Mixcraft 10 University 101
-
- Posts: 282
- Joined: Sat Sep 12, 2015 3:07 pm
- Location: Southern New England
Re: opening MC9 project in MC10.1
yes am using 587.
I'm unclear on how or what to send.
I'm unclear on how or what to send.
10.5 Pro studio build 596
Dell XPS i7-10700 2.9Ghz
48 GB RAM
Windows 10
Dell XPS i7-10700 2.9Ghz
48 GB RAM
Windows 10
-
- Posts: 1012
- Joined: Sat Sep 16, 2017 3:09 pm
Re: opening MC9 project in MC10.1
Hello,
I believe to have the output show, you need to have at least 1 output bus track in the project. That is regardless of a MC 10 project or loaded MC 9 project into MC 10. The top screenshot has no output bus. The bottom screenshot had one added and then the option appears on the mixer.
I believe to have the output show, you need to have at least 1 output bus track in the project. That is regardless of a MC 10 project or loaded MC 9 project into MC 10. The top screenshot has no output bus. The bottom screenshot had one added and then the option appears on the mixer.
-
- Posts: 282
- Joined: Sat Sep 12, 2015 3:07 pm
- Location: Southern New England
Re: opening MC9 project in MC10.1
I think your correct cactus head. I haven’t tried it yet but output would default to master track.
Good catch.
thank you
Good catch.
thank you
10.5 Pro studio build 596
Dell XPS i7-10700 2.9Ghz
48 GB RAM
Windows 10
Dell XPS i7-10700 2.9Ghz
48 GB RAM
Windows 10